– 33 –
4-9.
Adjusting the amount of the alternating vertical movement
of the walking foot and the presser foot
Adjust the amount of the alternating vertical move-
ment of the walking foot and the presser foot us-
ing dial
. Turn the dial clockwise to increase the
amount of the alternating vertical movement of the
walking foot and the presser foot, or counterclock-
wise to decrease it.
The amount of the alternating vertical movement of
the walking foot and presser foot has been facto-
ry-limited to 6.5 mm at the time of shipment.
To cancel the restriction to the amount of the alter-
nating vertical movement of the walking foot and the
presser foot, remove the top cover, loosen setscrews
and shift stopper
to the right.
Be aware that the presser foot and the
walking foot may interfere with each oth-
er when releasing the stopper.
The presser foot may also interfere with
the needle bar when a heavy-weight ma-
terial is used.
Make sure that the presser foot interferes
with neither the walking foot nor the
presser bar before operating the sewing
machine.