Industrial Sewing Machine SADE
15
Before operation
Be sure to use the casters with a locking mechanism and lock them to secure the
machine during the operation, maintenance, inspection and repair in order to pre-
vent accident that can result in personal injury or death.
Be sure to make sure that the connectors and cables are free from damage, drop-
out and looseness before turning the power on in order to prevent accident result-
ing in personal injury or death.
Before you put the machine into operation for the first time after the set-up, clean it
thoroughly. Remove all dust gathering during transportation and oil it well.
Never put your hand into the moving sections of the machine in order to prevent
accident that can result in personal injury or death.
In addition, check to be sure that the direction of rotation of the pulley agrees with
the arrow shown on pulley.
Users should know the exact rules of first aid with wounds, crushes, impacts, cuts
the various parts of the body, electric shock and with other foreseeable accidents.
The working of faulty machine or working of machine that has any damages is
prohibited.
Do not turn the machine on with electric cables damaged or deformed, or with
guards damaged or deformed, or with safety devices damaged.
Do not remove covers during operation. Do not operate the machine if the guards
are not in place or are damaged.
The wires are placed in insulation which protects them from damage. They must
not be cut, break from fasteners and so on.
Protect the electrical system from water and moisture. It is unacceptable to wash
electrical equipment with water spray.
Before starting the machine check that in hazardous areas (the area around the
machine) are not bystanders. Check the status of warning signs.
Before turning the machine on check the reliability of connections elements of the
machine (tighten loose connections), check the completeness of shields if there is
any visible damage (in the particular electrical cables and work items). Repair
damages or report to a supplier or manufacturer.
Before starting work, make sure that the way of turning the machine off is clear in
the event of sudden failure.
Hazardous places were marked with warning pictograms on the machine. The im-
portance of individual signs, see "Safety signs". Check out the meaning of all the
following signs, pay attention to the places marked by pictograms during opera-
tion.
Keep a log with notes on any problems encountered, failures, acci-
dents or maintenance carried out on your own responsibility.
To Next Page
Loading...
Need help?
General
