Art. No. SC 1000 KNX
Objects
A channel of the function "scene extension" only has one KNX communication object...
- "D.Output channel x - Scene extension" (1-byte transmitting):
Scene extension telegrams (values in compliance with KNX DPT 18.001) are transmitted to
the bus via this object after pressing the sensor element. This can cause, for example, a
scene push button sensor, scene controller or an actuator with its own scene function to be
activated via the extension object on these devices. It is possible to transmit call telegrams
or storage telegrams.
The object is only available when the function of the channel is configured to "scene
extension".
i Status objects are not available because a KNX channel of the function "scene extension"
has no dynamic status elements.
Page 101 of 347
Software "Smart Control 501511"
Functional description
To Next Page
Loading...
