Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
Hysteresis (%) 10...50 % This parameter defines the hysteresis of
the configured brightness limiting value.
If the preset limiting value is exceeded,
a "1" telegram is transmitted to the bus
via the limiting value object. As soon as
values fall below the limiting value less
the set hysteresis, the device transmits
a "0" telegram to the bus.
This parameter is only visible on the
enabled limiting value object.
Function of operation
LED
always OFF
always ON
The parameter defines the function of
the operation LED on the front of the
device.
System page without password
protection
with password protection
Different device settings can be made
available to the administrator via a
system page. This administrator area
can optionally be protected by a
password. The parameter "System
page" defines whether the system page
can be accessed with or without
password protection.
In the as-delivered state (demo project),
the password protection is active. The
administrator password can be changed
if required. The password can only be
changed locally on the device via the
display page "Set password". In the
default setting, the password is defined
as "0000".
Start page present
not present
The start page is on the display page of
the main menu level. Frequently used
operating functions or central functions
can be stored on the start page. The
maximum of 4 operational functions
ensure that the start page is very clearly
structured. There are no submenus or
additional navigation elements either.
Thus, the channels can be operated
quickly and clearly and their status can
be read at a glance.
This parameter defines whether the start
page is available or not. The display
pages of the main menu level can be
selected in sequence and thus
displayed. The display sequence is
fixed: Start page (if available) ->
favourite page (if available) -> room
page -> function page -> ...
If the start page is available, the
parameter node "Display -> Timer" is
available.
Page 244 of 347
Software "Smart Control 501511"
Parameters

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English