Art. No. SC 1000 KNX
Automatic return to the
start page after
5s
10s
15s
20s
30s
45s
1.0 min
If the start page is available, a time-
controlled return to this display page
takes place. The start page thus
corresponds to the basic display of the
Smart Control. This parameter defines
the time that must elapse after the last
operation until the return to the start
page.
Favourite page present
not present
The favourite page is on the display
page of the main menu level. The
favourite page can be used to
concentrate essential operating and
display functions at a central place in the
device. The maximum of 4 operational
functions ensure that the favourite page
is very clearly structured as well. Since
there are no submenus or additional
navigation elements, the channels can
be operated quickly and clearly and their
status can be read at a glance.
This parameter defines whether the
favourite page is available or not. The
display pages of the main menu level
can be selected in sequence and thus
displayed. The display sequence is
fixed: Start page (if available) ->
favourite page (if available) -> room
page -> function page -> ...
If a favourite page is available, the
parameter node "Display -> Favourite
page" is available.
Weather station page present
not present
The device offers the possibility to
display measurement data of a KNX
weather station. If the device was
commissioned with an ETS
programming operation, the display
page of the weather station can be
recalled via the function page. This
requires that the page of the weather
station be configured centrally as
"available" by the parameter "Weather
station page" in the ETS.
Up to 14 different measured values can
be displayed on the display page of the
weather station. The measured values
of various data types have to be made
available to the device via the bus from
an external weather station.
The device uses up to 7 KNX channels
to be able to receive all measured
values via the bus. For this reason, the
choice of available KNX channels is
reduced by 7 channels if a display
function for the weather station is
enabled. If the weather station display
page is not configured, a maximum of
30 KNX channels are available for
general configuration. If, however, there
is a weather station display page, only
Page 245 of 347
Software "Smart Control 501511"
Parameters
To Next Page
Loading...
Need help?
General
