Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
Number of decimal
places
0...1...3 This parameter defines how many
places the status value has after the
decimal point in the display.
Display external value
2...4
Like "Display external value 1"!
h Display -> Room temperature controller side
Display of outdoor
temperature
present
not present
The device offers the possibility to
display measurement data of a KNX
weather station. On the display page of
the room temperature controller side the
display of the outdoor temperature has
its own display element. The measured
value itself is received by a separate
KNX communication object.
This parameter defines whether the
measured value "Outdoor temperature"
should be displayed on the room
temperature controller side.
Display of operating
mode switch-over
present
not present
This parameter defines whether an
operating mode switch-over is possible
on the room temperature controller side.
If the operating mode switch-over is
present, additional parameters are
available.
Display of status text of
the operating mode
switch-over
Yes
No
In the operating and display element of
the operating mode switch-over a status
text can be displayed optionally on the
room temperature controller side, which
visualises the activity of the mode below
the display of the operating mode
(Comfort, Standby, ...) of the integrated
room temperature controller.
In the case of a comfort extension that
has been activated using the presence
button, the remaining extension time is
displayed.
Presence button Yes
No
This parameter defines whether the
"Comfort" operating mode can be
extended using a presence button on
the room temperature controller side.
Setpoint value shift
display
present
not present
This parameter defines whether a
setpoint shift is possible on the room
temperature controller side.
If the operating mode switch-over is
present, additional parameters are
available.
Designation of the
setpoint shift
Setpoint shift,
free text with a maximum
A text name can be assigned here to the
setpoint shift function, which is displayed
Page 277 of 347
Software "Smart Control 501511"
Parameters

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English