Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
Function: 2-channel operation
Object
h
0
Function
Channel 1 value
Name
B.Module rocker/
B.Module button 1
1,2
Type
1 byte
DPT
5.xxx
Flag
C, -, T, (R)
3
Description 1-byte object for the transmission of value telegrams, if 2-channel operation is
activated.
Function: 2-channel operation
Object
h
0
Function
Channel 1 value
Name
B.Module rocker/
B.Module button 1
1,2
Type
2 byte
DPT
9.001
Flag
C, -, T, (R)
3
Description 2-byte object for the transmission of value telegrams, if 2-channel operation is
activated.
Function: 2-channel operation
Object
h
18
Function
Channel 2 switching
Name
B.Module rocker/
B.Module button 1
1,2
Type
1-bit
DPT
1.xxx
Flag
C, W, T,
(R)
3
Description 1-bit object for the transmission of switching telegrams, if 2-channel operation
is activated.
Function: 2-channel operation
Object
h
18
Function
Channel 2 value
Name
B.Module rocker/
B.Module button 1
1,2
Type
1 byte
DPT
5.xxx
Flag
C, -, T, (R)
3
Description 1-byte object for the transmission of value telegrams, if 2-channel operation is
activated.
1: The number of rockers or buttons depends on the planned device variant.
2: The objects have been described for rocker 1 or button 1 as an example. The objects for the
other rockers/buttons are defined in the same way by shifting the object number and changing
the object name.
3: For reading, the R-flag must be set. The last value written to the object via the bus or by the
device will be read.
Page 28 of 347
Software "Smart Control 501511"
Object table

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English