Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
other operating areas /
button pairs of the
extension module.)
it is to be divided horizontally or
vertically. This defines the actuation
points of the operating areas.
h Push-button extension module -> Button configuration -> Operation concept of extension
module -> Module rocker switch 1 (buttons 1/2)
Function No function
Switching
Dimming
Venetian blind
Value transmitter 1-byte
2-byte value transmitter
Scene extension
2-channel operation
This parameter is used to define the
basic function of the rocker.
Depending on this choice, the ETS
displays different communication objects
and parameters for this rocker.
The following parameters are only visible for the rocker function "Switching"...
Command on pressing
rocker 1.1
No function
ON
OFF
TOGGLE
Depending on the "button arrangement"
parameter, these parameters define the
reaction that takes place when the top
(or left-hand) rocker is pressed or
released.
Command on releasing
rocker 1.1
No function
ON
OFF
TOGGLE
Command on pressing
rocker 1.2
No function
ON
OFF
TOGGLE
Depending on the "button arrangement"
parameter, these parameters define the
reaction that takes place when the
bottom (or right-hand) rocker is pressed
or released.
Command on releasing
rocker 1.2
No function
ON
OFF
TOGGLE
The following parameters are only visible for the rocker function "Dimming"...
Command on pressing
rocker 1.1
No reaction
Brighter (ON)
Darker (OFF)
Brighter / darker (TOGGLE)
Brighter (TOGGLE)
Darker (TOGGLE)
Depending on the "Button arrangement"
parameter, this parameter defines the
reaction that takes place when the top
(or left-hand) rocker is pressed.
If the push button sensor is to toggle on
a brief press, the corresponding
switching objects of other sensors with
the same function must be linked with
one another. In the "Brighter/darker
(TOGGLE)" setting, the dimming objects
must be interlinked as well so that the
push button sensor can send the correct
telegram on the next button-press.
Page 312 of 347
Software "Smart Control 501511"
Parameters

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English