Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
Command on pressing
rocker 1.2
No reaction
Brighter (ON)
Darker (OFF)
Brighter / darker (TOGGLE)
Brighter (TOGGLE)
Darker (TOGGLE)
Depending on the "Button arrangement"
parameter, this parameter defines the
reaction that takes place when the
bottom (or right-hand) rocker is pressed.
If the push button sensor is to toggle on
a brief press, the corresponding
switching objects of other sensors with
the same function must be linked with
one another. In the "Brighter/darker
(TOGGLE)" setting, the dimming objects
must be interlinked as well so that the
push button sensor can send the correct
telegram on the next button-press.
Time between switching
and dimming, rocker 1.1
(100...50000 x 1 ms)
100...400...50000 This parameter defines how long the top
(or left-hand) rocker must be pressed for
the pushbutton sensor to send a
dimming telegram.
Time between switching
and dimming, rocker 1.2
(100...50000 x 1 ms)
100...400...50000 This parameter defines how long the
bottom (or right-hand) rocker must be
pressed for the pushbutton sensor to
send a dimming telegram.
Advanced parameters Activated
Deactivated
When the advanced parameters are
activated, the ETS shows the following
parameters.
Advanced parameters
activated...
Increase brightness by 1.5 %
3 %
6 %
12.5 %
25 %
50 %
100 %
This parameter sets the relative
dimming level when the brightness is
increased. On each button-press, the
brightness is changed at maximum by
the configured level.
Especially with smaller dimming levels it
is advisable for the push button sensor
to repeat the dimming telegrams
automatically (see "telegram repetition").
Reduce brightness by 1.5 %
3 %
6 %
12.5 %
25 %
50 %
100 %
This parameter sets the relative
dimming level when the brightness is
reduced. On each button-press, the
brightness is changed at maximum by
the configured level.
Especially with smaller dimming levels it
is advisable for the push button sensor
to repeat the dimming telegrams
automatically (see "telegram repetition").
Transmit stop telegram?
Page 313 of 347
Software "Smart Control 501511"
Parameters

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English