Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
continues the value adjustment in the
same direction.
The following parameters are only visible for the rocker function "Value transmitter 2 byte"...
Function Temperature value
transmitter
Brightness value
transmitter
Value transmitter
(0...65535)
A rocker configured as "Value
transmitter 1 byte" permits selecting
whether the values to be transmitted are
to be interpreted as temperature values
(0 °C to 40 °C), as brightness values
(0 lux to 1500 lux) or as integers
(0 to 65535). The following parameters
and their settings depend on this
selection.
Temperature value
(0...40 °C)
Rocker 1.1
0...20...40 Depending on the "Button arrangement"
parameter, this parameter defines the
object value when the top (or left-hand)
rocker is pressed. Visible only if
"Function = Temperature value
transmitter"!
Temperature value
(0...40 °C)
Rocker 1.2
0...20...40 Depending on the "Button arrangement"
parameter, this parameter defines the
object value when the bottom (or right-
hand) rocker is pressed. Visible only if
"Function = Temperature value
transmitter"!
Brightness value
Rocker 1.1
0, 50,...300..., 1450,
1500 lux
Depending on the "Button arrangement"
parameter, this parameter defines the
object value when the top (or left-hand)
rocker is pressed. Visible only if
"Function = Temperature value
transmitter"!
Brightness value
Rocker 1.2
0, 50,...300..., 1450,
1500 lux
Depending on the "Button arrangement"
parameter, this parameter defines the
object value when the bottom (or right-
hand) rocker is pressed. Visible only if
"Function = Brightness value
transmitter"!
Value (0...65535)
Rocker 1.1
0...65535 Depending on the "Button arrangement"
parameter, this parameter defines the
object value when the top (or left-hand)
rocker is pressed. Visible only with
"Function = Value transmitter
(0...65535)"!
Value (0...65535)
Rocker 1.2
0...65535 Depending on the "Button arrangement"
parameter, this parameter defines the
Page 319 of 347
Software "Smart Control 501511"
Parameters

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English