Jung Smart Control SC 1000 KNX User Manual

Art. No. SC 1000 KNX
Value transmitter 0...100%
(1 byte)
Temperature value
transmitter (2-bytes)
Command of button for
channel 1 (2)
Rocker 1.1
ON
OFF
TOGGLE
This parameter defines the object value
transmitted to the bus when the top (or
left-hand) rocker is pressed. Only visible
if "Function channel 1 (2) = Switching (1
bit)"!
Command of button for
channel 1 (2)
Rocker 1.2
ON
OFF
TOGGLE
This parameter defines the object value
transmitted to the bus when the bottom
(or right-hand) rocker is pressed. Only
visible if "Function channel 1 (2) =
Switching (1 bit)"!
Value of the button for
Channel 1 (2)
Rocker 1.1 (0...255)
0...255 This parameter defines the object value
transmitted to the bus when the top (or
left-hand) rocker is pressed. Visible only
if "Function channel 1 (2) = value
transmitter 0…255 (1 byte)"!
Value of the button for
Channel 1 (2)
Rocker 1.2 (0...255)
0...255 This parameter defines the object value
transmitted to the bus when the bottom
(or right-hand) rocker is pressed. Visible
only if "Function channel 1 (2) = value
transmitter 0…255 (1 byte)"!
Value of the button for
Channel 1 (2)
Rocker 1.1 (0...100 %)
0...100 This parameter defines the object value
transmitted to the bus when the top (or
left-hand) rocker is pressed. Visible only
if "Function channel 1 (2) = value
transmitter 0…100 % (1 byte)"!
Value of the button for
Channel 1 (2)
Rocker 1.2 (0...100 %)
0...100 This parameter defines the object value
transmitted to the bus when the bottom
(or right-hand) rocker is pressed. Visible
only if "Function channel 1 (2) = value
transmitter 0…100 % (1 byte)"!
Temperature value of
the button for channel 1
(2)
Rocker 1.1 (0...40 °C)
0...40 This parameter defines the temperature
value transmitted to the bus when the
top (or left-hand) rocker is pressed.
Visible only if "Function channel 1 (2) =
Temperature value transmitter (2
bytes)"!
Page 323 of 347
Software "Smart Control 501511"
Parameters

Jung Smart Control SC 1000 KNX Specifications

General

Brand	Jung
Model	Smart Control SC 1000 KNX
Category	Controller
Language	English