Jung Smart Control SC 1000 KNX - Page 46

Art. No. SC 1000 KNX
Function: Fan controller
Object
h
115
Function
Ventilation, fan level 1
Name
C.Output
Type
1-bit
DPT
1.001
Flag
C, -, T, R
Description 1-bit object for switching activation of the first fan level. This object is only
available in this way when the fan control is to take place over 8 x 1 bit and at
least one fan level is enabled (parameter-dependent).
Function: Fan controller
Object
h
116
Function
Ventilation, fan level 2
Name
C.Output
Type
1-bit
DPT
1.001
Flag
C, -, T, R
Description 1-bit object for switching activation of the second fan level. This object is only
available when the fan control is to take place over 8 x 1 bit and at least two
fan levels are enabled (parameter-dependent).
Function: Fan controller
Object
h
117
Function
Ventilation, fan level 3
Name
C.Output
Type
1-bit
DPT
1.001
Flag
C, -, T, R
Description 1-bit object for switching activation of the third fan level. This object is only
available when the fan control is to take place over 8 x 1 bit and at least three
fan levels are enabled (parameter-dependent).
Function: Fan controller
Object
h
118
Function
Ventilation, fan level 4
Name
C.Output
Type
1-bit
DPT
1.001
Flag
C, -, T, R
Description 1-bit object for switching activation of the fourth fan level. This object is only
available when the fan control is to take place over 8 x 1 bit and at least four
fan levels are enabled (parameter-dependent).
Function: Fan controller
Object
h
119
Function
Ventilation, fan level 5
Name
C.Output
Type
1-bit
DPT
1.001
Flag
C, -, T, R
Description 1-bit object for switching activation of the fifth fan level. This object is only
available when the fan control is to take place over 8 x 1 bit and at least five
fan levels are enabled (parameter-dependent).
Function: Fan controller
Object
h
120
Function
Ventilation, fan level 6
Name
C.Output
Type
1-bit
DPT
1.001
Flag
C, -, T, R
Description 1-bit object for switching activation of the sixth fan level. This object is only
available when the fan control is to take place over 8 x 1 bit and at least six
fan levels are enabled (parameter-dependent).
Page 46 of 347
Software "Smart Control 501511"
Object table