Jung Smart Control SC 1000 KNX - Page 61

Art. No. SC 1000 KNX
Function: Limiting value monitoring for weather station display
Object
h
249
Function
Limiting value ext. value 2
Name
W.Limiting value
external value 2
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the second external
measured value.
"0" = limiting value inactive, "1" = limiting value active
Function: Limiting value monitoring for weather station display
Object
h
250
Function
Limiting value ext. value 3
Name
W.Limiting value
external value 3
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the third external measured
value.
"0" = limiting value inactive, "1" = limiting value active
Function: Limiting value monitoring for weather station display
Object
h
251
Function
Limiting value ext. value 4
Name
W.Limiting value
external value 4
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the fourth external
measured value.
"0" = limiting value inactive, "1" = limiting value active
1: For reading, the R-flag must be set. The last value written to the object via the bus will be
read.
Page 61 of 347
Software "Smart Control 501511"
Object table