Jung Smart Control SC 1000 KNX - Page 60

Art. No. SC 1000 KNX
Function: Limiting value monitoring for weather station display
Object
h
244
Function
Limiting value
Brightness sensor 3
Name
W.Lim. value
brightness sensor
3
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the third brightness value.
"0" = limiting value inactive, "1" = limiting value active
Function: Limiting value monitoring for weather station display
Object
h
245
Function
Limiting value max.
brightness
Name
W.Limiting value
MaxBrightness
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the measured value of the
maximum brightness.
"0" = limiting value inactive, "1" = limiting value active
Function: Limiting value monitoring for weather station display
Object
h
246
Function
Limiting value twilight
Name
W.Limiting value
twilight
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the twilight measured value.
"0" = limiting value inactive, "1" = limiting value active
Function: Limiting value monitoring for weather station display
Object
h
247
Function
Lim. val. outdoor temperature
Name
W.Limiting value
outdoor
temperature
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the measured value of the
outdoor temperature.
"0" = limiting value inactive, "1" = limiting value active
Function: Limiting value monitoring for weather station display
Object
h
248
Function
Limiting value ext. value 1
Name
W.Limiting value
external value 1
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description 1-bit object to receive a limiting value telegram for the first external measured
value.
"0" = limiting value inactive, "1" = limiting value active
1: For reading, the R-flag must be set. The last value written to the object via the bus will be
read.
Page 60 of 347
Software "Smart Control 501511"
Object table