Juniper ACX7348 - Page 31

2—
AC inlet plug
4—
Power cord retainer
ACX7348 AC Power Specicaons
Table 7 on page 23 lists the power specicaons for the AC PSM.
Table 7: AC Power Specicaons for ACX7348 Routers (Base Chassis with Dual Roung Engines)
Item Specicaons for ACX7348
AC input voltage Operang range: 180 VAC to 264 VAC
AC input line frequency 47 Hz - 63 Hz, Nominal: 50 Hz - 60 Hz
AC input current rang 13 A, Nominal Voltage: 200 VAC - 240 VAC
Typical power consumpon 520 W (without opcs) at 50% trac load, with IMIX
packet size of 1000 bytes.
Maximum power consumpon 992 W at 100% trac load, with IMIX packet size of 1000
bytes (48x1.5W SFP+ opcs and 8x5W QSFP28 opcs)
AC Power Supply Module LEDs on ACX7348 Routers
The AC power supply module (PSM) on an ACX7348 router uses a single LED to indicate power status.
Figure 12 on page 24 shows the AC PSM components along with the status LED.
23