Juniper JUNOSE 11.2.X MULTICAST ROUTING User Manual

host1:boston# show ipv6 mld groups
Grp Address Interface State Reporter ExpTim oldHTo
------------------- ---------------------- -------- --------------- ------ ------
ff3e::1 ATM5/0.12 Version2 fe80::f7:0:91a: 377 0
0
oif-map OIFMAP ATM5/0.
121
ff3e::1 ATM5/0.13 Version2 fe80::f7:0:a1a: 369 0
0
oif-map OIFMAP ATM5/0.
121
ff3e::2 ATM5/0.12 Version2 fe80::f7:0:91a: 370 0
0
Included Sources:
10::2 oif-map OIFMAP self 370
10::10 oif-map OIFMAP ATM5/0. 370
120
10::11 oif-map OIFMAP ATM5/0. 370
121
ff3e::2 ATM5/0.13 Version2 fe80::f7:0:a1a: 373 0
0
Included Sources:
10::2 oif-map OIFMAP self 373
10::10 oif-map OIFMAP ATM5/0. 373
120
10::11 oif-map OIFMAP ATM5/0. 373
121
Counts: 4 version-2, 0 version-1, 0 check state, 0 disabled
(4 total)
0 excluded
Source-groups: 6 included, 0 excluded
• See show ipv6 mld groups.
show ipv6 mld interface
• Use to display MLD information for interfaces on which you enabled MLD.
• Specify the brief keyword to see a summary of the information.
• Specify the count keyword to see the number of MLD interfaces.
• Field descriptions
• Interface—Type of interface and interface specifier. For details about interface types
and specifiers, see Interface Types and Specifiers in JunosE Command Reference
Guide.
• address—IPv6 link-local address of the interface
• Administrative state—Status of the interface in the software: enabled or disabled
• Operational state—Physical status of the interface: enabled or disabled
• Version—MLD version
• State—Function of the interface: querier or nonquerier
• Query Interval—Time interval at which this interface sends query messages
193Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Configuring Multicast Listener Discovery

Juniper JUNOSE 11.2.X MULTICAST ROUTING Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X MULTICAST ROUTING
Category	Software
Language	English