Juniper JUNOSE 11.2.X MULTICAST ROUTING

• Map Name—Name of the map associated to the OIF
• Counts—Number of source-group mappings to OIFs
• Example
host1# show ipv6 mld mapped-oif
OIF Oper Group Address Source Address Join I/F Map Name
--------------- ---- --------------- --------------- --------------- ----------
ATM5/0.120 Up ff3e::2 10::10 ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.121 Up ff3e::1 * ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ff3e::2 10::11 ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
Counts: 3 source-group mappings
• See show ipv6 mld mapped-oif.
show ipv6 mld oif-map
• Use to display all outgoing interface (OIF) maps or the OIF map for the specified map
name.
• Field descriptions
• Map Name—Name of the map associated to the show output
• Group Prefix—Multicast group IPv6 prefix
• Source Prefix—Source IPv6 prefix
• OIF—Outgoing interface associated with the group and source prefix
• Example
host1#show ipv6 mld oif-map
Map Name Group Prefix Source Prefix OIF
------------------ ------------------ ------------------ ------------------
OIFMAP ff3e::/112 ::/0 ATM5/0.121
ff3e::/112 10::2/128 self
ff3e::/112 10::10/128 ATM5/0.120
ff3e::3/128 ::/0 ATM5/0.130
ff3e::4/128 ::/0 ATM5/0.130
• See show ipv6 mld oif-map.
show ipv6 mld membership
• Use to display MLD membership information for multicast groups and (S, G) channels.
• Specify the brief keyword to see a summary of the information.
197Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Configuring Multicast Listener Discovery