Juniper SRX3600 Hardware Guide

Table 32: Chassis Component Alarm Conditions on SRX3400 and SRX3600 Services Gateways (continued)
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
YellowReplace the serial cable
connected to the device.
If the cable is replaced and
no excessive framing
errors are detected within
5 minutes from the last
detected framing error, the
alarm is cleared
automatically.
Excessive framing errors on
console port.
An excessive framing error
alarm is triggered when the
default framing error
threshold of 20 errors per
second on a serial port is
exceeded.
This might be caused by a
faulty serial console port
cable connected to the
device.
Routing Engine
- RE0 (top) and
RE1 (bottom)
YellowReformat hard disk and
install bootable image. If
this fails, replace failed
Routing Engine.
Error in reading or writing
hard disk.
YellowInstall bootable image on
default master Routing
Engine. If this fails, replace
failed Routing Engine.
System booted from default
backup Routing Engine. If
you manually switched
mastership, ignore this
alarm condition.
RedReplace failed Routing
Engine.
Hard disk missing in boot
list.
RedReplace failed Routing
Engine.
Routing Engine failed to
boot.
RedThe Ethernet management
interface (fxp0 or em0) on
the Routing Engine is down.
181

Juniper SRX3600 Specifications

General

Brand	Juniper
Model	SRX3600
Category	Gateway
Language	English