Figure 24: NP-IOC SRX1K3K-NP-2XGE-SFPP
For detailed information about supported transceivers, see the SRX Series Services Gateway Transceiver
Guide at www.juniper.net/documentation/.
•
2-port Ethernet SFP+ NP-IOC for SRX3400, SRX3600, and SRX1400 Services Gateways
•
Power requirement: 52 W maximum
•
Weight: 2.4 lb (1.1 kg)
•
Maximum configurable MTU: 9192 bytes
Description
•
Junos OS Release 12.1X44-D10 and laterSoftware release
Two SFP+ sockets for Gigabit Ethernet transceivers
Supported SFP+ transceivers:
10GBASE-ER (model number SRX-SFP-10GE-ER)
10GBASE-LR (model number SRX-SFP-10GE-LR)
10GBASE-SR (model number SRX-SFP-10GE-SR)
10GBASE-LRM (model number SFPP-10GE-LRM)
Supported SFP+ direct attach cables:
SRX-SFP-10GE-DAC-1M
SRX-SFP-10GE-DAC-3M
Cables and
connectors
•
SRX1400: Front slot labeled 2
•
SRX3400: Front slots labeled 1-4 and rear slots labeled 5-7.
•
SRX3600: Front slots labeled 1-6 and rear slots labeled 7-12.
Supported Slots
NP-IOCs are cold-swap-only. You must power-off the services gateway before removing,
replacing, or adding NP-IOCs.
Swapping
43
To Next Page
Loading...
Need help?
General
