You can manage the SRX380 Services Gateway by using the same interfaces that you use for managing
other devices that run Junos OS—the CLI, the J-Web graphical interface, and Junos Space.
The first supported version of Junos OS for the SRX380 Services Gateway is Release 20.1R1.
This video provides a brief overview of the SRX380.
Video: SRX380 Hardware Overview
SRX380 Services Gateway FRUs
Field-replaceable units (FRUs) are components that you can replace at your site. The FRUs in the SRX380
Services Gateway are:
•
Power supplies
If only one power supply is installed in your device, you must power off the device before removing the
power supply.
•
Mini-PIMs
The Mini-PIMs are not hot-swappable. You must power off the device before removing or installing
Mini-PIMs.
NOTE: If you have a Juniper J-Care service contract, register any addition, change, or upgrade
of hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/.
Failure to do so can result in significant delays if you need replacement parts. This note does
not apply if you replace existing components with the same type of component.
Benefits of the SRX380 Services Gateway
•
Multiple WAN connectivity options—The SRX380 supports multiple options such as Ethernet, serial,
T1/E1, VDSL2, Wi-Fi, and 3G/4G LTE wireless for WAN or Internet connectivity to link sites.
•
Comprehensive security—The SRX380 provides security in every layer with AES-256 MACsec encryption,
IPS, UTM, Juniper Sky Advanced Threat Prevention, and Application Security for protection against
potential vulnerabilities.
16
To Next Page
Loading...
Need help?
General
