Figure 23: Location of the Serial Number Label
Locating the Mini-PIM Serial Number Label
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable and each Mini-PIM has a unique serial
number. The serial number label is located on the right side of the Mini-PIM, when the Mini-PIM is
horizontally oriented (as it would be when installed on the device). The exact location might be slightly
different on different Mini-PIMs, depending on the placement of components on the Mini-PIM.
Listing the SRX380 Services Gateway Component Details by Using the CLI
Before contacting Juniper Networks to request an RMA, you must find the serial number of the SRX380
Services Gateway or component.
Use the show chassis hardware command to view all the components of an SRX380 Services Gateway
and the corresponding serial numbers.
user@host>
NOTE: In the output of the show chassis hardware command, the Mini-PIM slot number is
reported as an FPC number, and the Mini-PIM number (always 0) is reported as the PIC number.
Most components also have a serial number ID label affixed to the component body.
71
To Next Page
Loading...
Need help?
General
