EasyManuals Logo

Juniper SRX380 Hardware Guide

Juniper SRX380
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
AC Power Supply LEDs on SRX380 Services Gateways
Each power supply has two LEDs on the faceplate that indicate the status of the power supply.
Table 8 on page 25 describes the AC power supply LEDs.
Table 8: AC Power Supply LEDs on the SRX380 Services Gateway
DescriptionColorLED
No AC power input.OffAC OK
Power supply failure.Red
The power supply is delivering power and is functioning correctly.Green
No AC power inputOffDC OK
Power supply failure.Red
The power supply is delivering power and is functioning correctly.Green
Power Specifications for SRX380 Services Gateways
Table 9 on page 25 provides the AC power supply electrical specifications for SRX380 devices.
Table 9: AC Power Supply Electrical Specifications for SRX380 Devices
SpecificationPower Requirement
100 to 240 VACAC input voltage
50 Hz/60 Hz nominalAC input line frequency
8.5 A at 100 VAC
4.25 A at 240 VAC
AC system current rating
25

Table of Contents

Other manuals for Juniper SRX380

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX380 and is the answer not in the manual?

Juniper SRX380 Specifications

General IconGeneral
Firewall Throughput20 Gbps
IPSec VPN Throughput4 Gbps
Memory8 GB
MTBF200, 000 hours
Form Factor1U
Concurrent Sessions1, 000, 000
Interfaces16 x 1GbE, 4 x 10GbE
Power SupplyDual redundant AC or DC
Operating Temperature32° to 104° F (0° to 40° C)
Storage Temperature-4° to 158° F (-20° to 70° C)
Humidity5% to 90% non-condensing

Related product manuals