Juniper SRX380 - SRX380 Interface Modules Overview

Table 6: SRX380 Services Gateway Back Panel Components (continued)
DescriptionComponentCallout
One power supply is preinstalled.Power supply input3
Slot for second SSD. Currently, the
SRX380 does not support a second
SSD.
SSD slot4
SRX380 Interface Modules Overview
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable network interface cards (NICs) supported
on the SRX300 line of services gateways. You can easily insert or remove Mini-PIMs from the front slots
of the SRX380 chassis. The Mini-PIMs provide physical connections to a LAN or WAN. The Mini-PIMs
receive incoming packets from the network and transmit outgoing packets to the network. During this
process, they perform framing and line-speed signaling for the medium type.
CAUTION: The Mini-PIMs are not hot-swappable. You must power off the services
gateway before removing or installing Mini-PIMs.
The following Mini-PIMs are supported on the SRX380 Services Gateway:
•
1-Port Serial Mini-PIM (SRX-MP-1SERIAL-R)
•
1-Port T1/E1 Mini-PIM (SRX-MP-1T1E1-R)
•
1-Port VDSL2 (Annex A) Mini-PIM (SRX-MP-1VDSL2-R)
•
LTE Mini-PIM (SRX-MP-LTE-AE and SRX-MP-LTE-AA)
•
Wi-Fi Mini-PIM (SRX-MP-WLAN-US, SRX-MP-WLAN-IL, and SRX-MP-WLAN-WW)
NOTE: Gigabit-Backplane Physical Interface Modules (GPIMs) are not supported on the SRX380
Services Gateway.
For more information on Mini-PIMs, see SRX300 Series and SRX550 High Memory Gateway Interface
Modules Reference.
22