Juniper SRX380 Hardware Guide

Merging a Snippet
To merge a snippet, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the
ex-script-snippet.conf file to the /var/tmp directory on your routing platform.
commit {
file ex-script-snippet.xsl; }
2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode
command:
[edit]
user@host# edit system scripts
[edit system scripts]
3. Merge the contents of the file into your routing platform configuration by issuing the load merge
relative configuration mode command:
[edit system scripts]
user@host# load merge relative /var/tmp/ex-script-snippet.conf
load complete
For more information about the load command, see CLI Explorer.
Documentation Conventions
Table 1 on page x defines notice icons used in this guide.
ix

Juniper SRX380 Specifications

General

Firewall Throughput	20 Gbps
IPSec VPN Throughput	4 Gbps
Memory	8 GB
MTBF	200, 000 hours
Form Factor	1U
Concurrent Sessions	1, 000, 000
Interfaces	16 x 1GbE, 4 x 10GbE
Power Supply	Dual redundant AC or DC
Operating Temperature	32° to 104° F (0° to 40° C)
Storage Temperature	-4° to 158° F (-20° to 70° C)
Humidity	5% to 90% non-condensing