JVC DR-MX10SEK User Manual

H EN
18
Selecting Devices to Connect
9 Connection methods vary with the devices used. Refer also to the manuals of the devices to be
connected.
9 Turn off the devices before connecting.
JVC
ANTENNA
OUT
IN
LEFT
PCM/
STREAM
RIGHT
COAXIAL
G-LINK
L-1
Y
PB
PR
HDD/DVD
COMPONENT
VIDEO OUT
HDD/DVD
OUTAUDIO
IN/OUT
L-2
IN/DECODER
HDD/DVD/VHS
OUTAUDIO
DIGITAL
Install if using the GUIDE Plus+ system via external
receiver.
Amplifier
TV
Connect with
antenna or cable
Connect with TV’s
antenna terminal
Connect with TV input
Via Component video
Connect with TV input
Via SCART connector
Connect with TV or amplifier input
Using Audio cable
Connect with video output of external device
Or with input of external receiver
Connect with IR blaster (G-LINK)
Cooling fan
Power cord
Placing the IR Blaster (G-LINK)
Do not place obstructions between
the IR blaster (G-LINK) and the
external receiver’s infrared
receptor.
External receiver
Rear View
Connect with amplifier’s digital input
Via Digital Audio (Coaxial)
Antenna
Cable, satellite broadcast
External receiver
DR-MX10SE.book Page 18 Wednesday, December 14, 2005 3:37 PM

JVC DR-MX10SEK Specifications

General

Brand	JVC
Model	DR-MX10SEK
Category	DVR
Language	English