H EN
76
Dubbing from HDD or DVD
to VHS
A Load a recordable tape.
0 When dubbing from a DVD disc, load a disc to
play.
B Under “Dubbing between HDD and
DVD Deck”, select “HDD
N
VHS” or
“DVD
N
VHS” in step B, then select
the programme to dub in step D.
[ P72]
C Set and confirm the recording.
A Select ASELECT REC. MODEB to set the
mode.
B Select ASELECT SND. MODEB to set the
playback sound.
C Select ACONFIRMB.
D Pause the recording.
0 Locate the recording start point with O/N,
then pause the recording.
E Select “EXECUTE”.
When dubbing ends, the broadcast
screen appears automatically after a
message is displayed.
To cancel a dubbing that is in progress
A
Press STOP/CLEAR ( o).
B Select ACANCELB, then press ENTER.
ABCDEFGHILM
9 Dubbing can be done from the HDD or a
DVD disc to a VHS tape.
.........................................................
NOTES:
0 Select ASPB or AEPB as the recording mode.
0 Select AL/RB, ALB, or ARB for the playback sound.
If the selected programme is in bilingual, the main
audio and sub audio will be recorded to the normal
sound of the VHS tape if you select AL/RB under
ASELECT SND. MODEB.
CANCEL
STOP
D
B, C, E
SELECT
CONFIRM
CONFIRM
WHILE HOLDING
SELECT
CONFIRM
EXECUTE
DR-MX10SE.book Page 76 Wednesday, December 14, 2005 3:37 PM
To Next Page
Loading...
Need help?
General
