Why does my JVC DVR remote control not work?
If the remote control for your JVC DVR isn't working, the batteries may be depleted. Remove the batteries, re-insert them after 5 minutes, and try again. If that doesn't work, replace the batteries with new ones.
What to do if my JVC DR-MX10SEK DVR says 'NO DISC'?
If 'NO DISC' is displayed on your JVC DVR, it could be that the disc loaded is dirty. Try cleaning the disc with a soft cloth.
Why does playback not start on my JVC DVR?
If playback on your JVC DVR doesn't start or stops immediately after pressing PLAY, it might be because the recording has just completed. Wait approximately 30 seconds, then press PLAY again.
How to fix a JVC DR-MX10SEK that does not operate?
If your JVC DVR is not operating, it may be due to the child lock being set. Cancel the child lock. If the unit still cannot be operated, turn the unit off, and then on again.
Why does my JVC DVR recorded programme end halfway?
If the recorded programme ends halfway on your JVC DVR, it may be because the channel does not correspond to that in the receiving area. Set the correct channel for the receiving broadcast.
Why the channel cannot be changed on my JVC DVR?
If you cannot change the channel on your JVC DVR, it is because the channel cannot be changed during recording.
What to do if my JVC DR-MX10SEK displays 'LOCK'?
If 'LOCK' is displayed on the front panel of your JVC DVR and the disc cannot be removed, cancel tray lock using the following method. While holding STOP/CLEAR (o), press OPEN/CLOSE (M) on the unit when the unit is in standby mode.
Why doesn't the disc space increase on my JVC DR-MX10SEK?
If the disc remaining space on your JVC DVR does not increase even though all recorded programmes have been deleted, it could be that the DVD-RAM disc contains data recorded on a computer. If the data is unwanted, format the disc on this unit.
How to open the disc tray on a JVC DVR?
If the disc tray on your JVC DVR does not open, press STOP/CLEAR (o) and STANDBY/ON on the unit simultaneously for more than 2 seconds until RESETTING is displayed on the front display panel. Press and hold OPEN/CLOSE (M) on the unit until the disc tray opens.
Why can't I dub from VCR on my JVC DR-MX10SEK?
If dubbing from the Video Cassette Recorder is not possible on your JVC DVR, check the external input channel F-1 setting.
General| Hard Drive Capacity | 160 GB |
|---|---|
| DVD Format | DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW |
| Remote Control | Yes |
| Tuner | Analog |
| Media Type | DVD |
| Video Input | Composite, S-Video |
| Video Output | Composite, S-Video |
| Audio Output | Analog Stereo, Digital Optical |
| Recording Formats | DVD-Video |
| Playback Format | DVD-Video, CD, MP3, JPEG |
| Connectors | S-Video, Composite |
| Video System | PAL |
| Audio Recording Format | Dolby Digital |
| Output Resolution | 1080i |
Critical advice on electrical hazards, laser safety, and handling the unit.
Guidance on device connection, initial setup, and operational precautions.
Essential advice for safe operation and maintenance of the equipment.
Guidelines on using copyrighted material and backing up recorded content.
Explores various dubbing options between HDD, DVD, VHS, and DV tapes.
Details on VHS dubbing, copy-once recording, and multi-disc playback.
Practical guides for recording, cutting scenes, and watching on other players.
Guidance on selecting and formatting DVD discs for optimal use.
Detailed setup and usage of the GUIDE Plus+ system for timer programming.
Lists discs that can be recorded on or played back by the unit.
Instructions for proper disc handling, storage, and lens maintenance.
Guidelines for maintaining VHS tape quality and correct loading.
Explains how to use the manual's conventions and the unit's menu system.
Identifies front panel parts and explains disc playback information displays.
Detailed explanation of each button's function on the remote control.
Guides for connecting external receivers and positioning the IR blaster.
Visual guide for connecting the unit to an antenna or cable source.
Step-by-step instructions for connecting via SCART cable.
Important considerations and setup steps for component video connections.
Instructions for dubbing from DV camcorders and configuring digital audio.
A sequential guide for setting up the unit and connected TV.
Detailed steps for the automatic setup process.
Downloading channel settings from a TV using T-V Link.
Guide to changing the language of the on-screen menus.
Adjusting output to match the TV's aspect ratio (4:3 or 16:9).
Configuring video signals for SCART and other terminals.
Entering postal code to activate and configure the GUIDE Plus+ EPG.
Configuring external receivers and downloading EPG data.
Explains remote operations and screen elements of the GUIDE Plus+ system.
Using the Editor to manage channels and referencing the Host Channel List.
Setting the unit's clock manually and using the Just Clock feature.
Assigning programme numbers to TV stations for EPG accuracy.
Step-by-step guide for manually tuning and configuring channels.
Procedures for removing channels or changing their order.
Initial steps for recording to HDD or DVD, including selecting source and mode.
Managing recording status and using the direct record function.
Choosing the appropriate recording mode for VHS tapes.
Choosing the playback source and opening the content library.
Choosing programmes via thumbnails and setting playback sequences.
Explains playback controls and using marks for navigation.
An overview of the different methods available for setting timer recordings.
Simplified timer programming using the EPG by pressing a single button.
Setting timer recordings by entering VIDEO Plus+ codes.
Features like unlocking video window and viewing extra programme info.
Manually specifying date, time, channel, and programme name for recordings.
Configuring recording parameters and using VPS/PDC for accuracy.
Finding programmes to record by browsing through categories.
Searching programmes by keyword and creating personalized profiles.
Setting timer recordings using codes and configuring EPG channels.
Scheduling recordings by date and time using a calendar view.
Checking for VPS/PDC signals and understanding their use in timer recording.
Steps to edit or delete previously set timer programmes.
Procedures for managing programmes listed in programme or calendar lists.
Using playback, stop, pause, search, and replay functions for VHS tapes.
Performing forward/reverse searches and using index signals on VHS tapes.
Watching recorded content while a programme is still being recorded.
Different ways to achieve live memory playback functionality.
Steps for playing DVD Videos and interacting with disc menus.
Selecting audio, subtitle languages, and camera angles for DVDs.
Playing back Video CDs that support the Playback Control function.
Activating progressive scan for better quality and enabling component output for VHS.
Instructions for playing MP3 audio files and viewing JPEG images.
Step-by-step guide for formatting various DVD disc types.
Process of finalising discs to ensure playback on other DVD players.
A table outlining dubbing sources, decks, types, and features.
Guidelines for recording digital broadcasts with copy protection.
Explains different methods for dubbing from HDD to DVD discs.
Covers dubbing between DVD, HDD, VHS, DV camcorders, and VCRs.
Detailed steps for dubbing content from HDD to DVD discs.
Step-by-step guide for dubbing content from a DV camcorder.
Options for selecting audio tracks during DV dubbing.
Configuring recording mode and sound for dubbing to VHS tapes.
Procedures for dubbing entire VHS tapes to HDD or DVD discs.
How to dub specific programmes from VHS tapes to HDD or DVD.
Simple one-touch dubbing from VHS to DVD, optimizing disc space.
Changing preview images and categories for recorded programmes.
Detailed procedures for modifying thumbnails and categories.
How to assign custom titles to programmes and play lists.
Inserting and removing chapter marks for easier navigation.
Choosing favourite scenes from programmes to build a play list.
Setting scene boundaries and finalizing the play list.
Editing existing scenes and changing their order in a play list.
Procedures for reordering scenes and adding new ones to play lists.
Removing programmes and using protection to prevent accidental deletion.
Guide to deleting specific segments from recorded programmes.
Procedures for dividing long recordings into separate parts.
How to access and navigate the help guide for operational assistance.
Explains various recording modes affecting quality and time.
Details the FR mode for variable recording time and quality.
Information on JUST mode for space optimization and DV mode features.
How to schedule programmes for regular daily or weekly recordings.
Quick timer setup for the week and protecting HDD recordings.
Configuring the duration for automatic temporary recording while watching TV.
Recording programmes that are currently being watched live.
Explains relief recording and important points for timer programming.
How to manage conflicts between dubbing and timer recording operations.
Adding discs to the library and searching for programmes within it.
Using B.E.S.T. to automatically improve VHS recording picture quality.
Setting up digital audio output for various sound formats.
Configuring the unit to remember playback positions on discs.
Choosing audio tracks (Hi-Fi L/R, Normal) for VHS playback.
Manual tracking adjustment and viewing remaining time on VHS tapes.
Activating child lock and locking the disc tray to prevent operation.
Programming the remote for TVs and managing multiple JVC recorders.
Adjusting which operational details are shown on the TV screen.
Navigating the playback menu to adjust modes and functions.
Configuring various repeat playback modes and segment repeats.
Methods for searching and playing specific parts of recordings.
Adjusting playback order, picture quality, and sound effects.
Configuring display, audio, and subtitle languages for DVDs.
Setting up digital audio output for various sound formats.
Setting temporary recording time and DV recording audio options.
Procedures for finalising discs and enabling automatic chapter creation for DV.
Settings for motion index, XP audio, and instant recording activation.
Configuring playback jump intervals and HDD recording alerts.
Adjusting on-screen displays, brightness, and startup behaviour.
Enabling quick startup and setting the on-screen display language.
Configuring video aspect ratio and signal settings for various terminals.
Optimizing VHS recording quality and adjusting VHS playback picture.
A list of TV station names and their corresponding on-screen ID abbreviations.
Guide to BBC, ITV, and other station channel numbers by region.
A reference list of language codes for various settings.
Explanations of key technical terms used in the manual.
Solutions for problems with unplayable discs and external connections.
Explanations for unit behavior and troubleshooting recording problems.
Solutions for common playback issues and dubbing failures.
Troubleshooting steps for issues encountered during editing.
Procedures for resetting the unit and resolving remote control issues.
Solutions for no images, distorted images, and connection problems.
Solutions for issues with recording, timer programming, and channel reception.
Common problems and solutions for the GUIDE Plus+ system.
Explanations for various error messages displayed during playback and recording.
Solutions for errors related to timer programming, dubbing, and disc finalisation.
Technical details on power, dimensions, recordable discs, and formats.
Specifications for inputs/outputs, tuning system, and memory backup.
An alphabetical listing of all terms and topics covered in the manual.
To Next Page
