KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
3.2 Operation
The KaController is operated by the navigator and the operating
keys.
The operations that can be called up and set using the navigator are
identical on both versions (with/without operating keys at the side)
so that the KaController with operating keys at the side is used
throughout the manual for ease of understanding.
The different selection menus are called up either using the
navigator or the operating keys at the side.
If no action is carried out using the navigator or function keys for
3 seconds, then the last change made is saved and the default
view is called up again.
Venkon
10
Menu selection using the navigator
Menu selection using operating keys
To Next Page
Loading...
