Kampmann KaControl - Kacontroller; Inputs for Processing Ext. Contacts; (E.g. Window Contacts, Card Readers Etc.)

6.5 KaController
• A flush-mounted backbox is needed for the KaController.
• Connect the KaController to the nearest Venkon on the wiring
diagram. The maximum bus length between the KaController and
Venkon is 30 m.
• By connecting a KaController to it, the respective Venkon
automatically becomes the master unit in the control circuit.
6.6 Inputs for Processing Ext. Contacts (e.g. window
contact, card reader etc.)
• All Venkon master units have multifunctional inputs that can be
assigned different functions during commissioning.
• Connect up the cables in accordance with the wiring diagram and
configure the functions using the KaController.
• The maximum cable length between the master unit and the
external potential-free contacts is 30 m.
No external contacts (e.g. window contacts, card readers etc.) can
be connected to the slave units.
KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Venkon
26