KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
3.2.1 Switching the Control Off and On
Once the control has been switched on, the default view appears on
the display showing the current target room temperature and the
fan stage set.
When the KaController is started up for the first time, the time is
not shown in the default view (see "Setting the time" selection
menu).
Switching off the control:
There are 3 options for switching off the control:
1. Press the ON/OFF key
2. Turn the navigator to the left until OFF appears
3. Press and hold down the navigator until OFF appears
Switching on the control:
There are 2 options for switching on the control:
1. Press the ON/OFF key
2. Press the navigator
Venkon
11
Default view
Default view
Control OFF display
To Next Page
Loading...
