Kampmann KaControl - Blocking Operating Options or Functions, Parameters 38

KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Venkon
52
10.3.14 Locking Operating Options or Functions, Parameter 38
Parameter P38 can be used to lock individual operating options or functions.
Parameter P38 must be used for the following (among other functions):
• ON/OFF function, Eco/Day as outlined in section 10.3.3
• Heating/cooling changeover function in a 2-pipe system in line with section 10.3.5
Every operating option or function is allocated a defined value.
The values of the locked operating options or functions must be added together and assigned to
parameter P38.
If Eco/Day function is locked, the ON/OFF function is automatically enabled (see section 10.3.3).
Operation Standard Min Max Unit
P38 Blocking of operating options or functions 72 0 255
Value
Automatic operating mode 1
Cooling-only operating mode 2
Real-time clock 4
Ventilation-only operating mode 8
Heating-only operating mode 16
Automatic fan operation 32
Eco/Day function 64
Timer programs 128
Value
Automatic operating mode 1 -
Cooling-only operating mode 2 -
Real-time clock 4 -
Ventilation-only operating mode 8 8
Heating-only operating mode 16 -
Automatic fan operation 32 -
Eco/Day function 64 64
Timer programs 128 -
Setting parameter P38:
(Example)
72
Value
Automatic operating mode 1 -
Cooling-only operating mode 2 2
Real-time clock 4 -
Ventilation-only operating mode 8 8
Heating-only operating mode 16 16
Automatic fan operation 32 -
Eco/Day function 64 64
Timer programs 128 -
Setting parameter P38:
(Example)
90
Example: Lock
• Eco/Day function
• Ventilation-only operating mode
Example: Lock
• Eco/Day function
• Ventilation-only operating mode
• Cooling-only operating mode
• Heating-only operating mode