Kampmann KaControl - Electrical Connections and DIP Switches; KaController Terminals; DIP Switch Settings

KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Venkon
23
Single-circuit control of up to 30 units with KaController for wall mounting
Master unit: C2 control design
Slave unit: C1 control design
Single-circuit control of up to 30 units with KaController incorporated in the
Venkon.
Master unit: C2 control design
Slave unit: C1 control design + inlet air temperature sensor
6.3 Single-circuit Control of up to 30 Units
Maximum permissible cable lengths
Total length of bus cables between the Venkon units
max. 300 m
max. 1000 m (Beldon 9860)
Total length of bus cables between the room control unit and master
unit
max. 30 m
Total length between Venkon and the external potential-free contacts
e.g. window contact etc.
max. 30 m