KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Venkon
22
Single-circuit control of up to 6 units with KaController for wall mounting
Master unit: C1 control design
Slave unit: C1 control design
Single-circuit control of up to 6 units with KaController incorporated into the
master unit
Master unit: C2 control design
Slave unit: C1 control design + inlet temperature sensor
6.2 Single-circuit Control of up to 6 Units
Maximum permissible cable lengths
Total length of bus cables between the Venkon units max. 30 m
Total length of bus cables between the room control unit and master unit max. 30 m
Total length between Venkon and the external potential-free e.g. window contact etc. max. 30 m
To Next Page
Loading...
