Kampmann KaControl - Unit Configuration by DIP Switch; DIP Switch Settings on PCB

KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Venkon
25
Venkon with Zone Manager multi-circuit control,
maximum 10 control circuits
6.4 Multi-circuit Control of up to 10 Control Circuits
Maximum permissible cable lengths
Total length of bus cables between the Venkon units in a control circuit
(see single-circuit controls)
max. 30 m
Total length of bus cables between the room control unit and master unit
(see single-circuit controls)
max. 30 m
Total length of bus cables between the control circuits (master units) incl. the
zone manager
max. 500 m