KaControl for Venkon
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1.48
Time setting view
Setting to hide
time in default view
3.2.4 Setting the Time
To call up the "Time setting" selection menu, press the TIMER key 1
x (quick access) or use the navigator.
Calling up the "Time setting" menu using the navigator:
Setting the time:
Use the navigator to set the following:
1. Current hour
2. Current minute
3. Current day
The "Timer program" selection menu is automatically called up
after the current day is confirmed by pressing the navigator.
If no action is carried out using the navigator or function keys for
7 seconds, then the last change made is saved and the default
view is called up again.
When the KaController is started up for the first time, the time is
not shown in the default view.
Only when the time has been set, is the current time shown in the
default view!
If "- -: --" is entered for the hour and minute, the realtime clock is
disabled and the time is hidden in the default view.
Venkon
14
To Next Page
Loading...
