ERGOcom 3
4 Start-up | 4.1 Start-up
▶ Save this logo/image in bitmap format, giving it the filename USERLOGO.bmp.
▶ Copy the file USERLOGO.bmp to the USB drive using the drag&drop function.
The USB drive reports to the PC using the name ERGOCOM3.
Note
The ERGOcom 3 must not be switched off during transfer of the image (takes
approx. 20 seconds).
You can set which logo/image is to be displayed in the OSD menu display interface.
See also: 5.4.5 Menu point, other, Page 49
23/56
To Next Page
Loading...
