Kawai MP7SE - Page 147

147
Appendix
MIDI Implementation
Category Parameter Com. Sub. Part Byte Value (HEX)
8.VirtTech Topboard 50 08 pp 1 00~03 (Close, Open1~3)
Stereo Width 50 13 pp 1 00~7F
KeyoNoise 50 24 pp 1 00, 01~0A (O, 1~10) <for E.PIANO sound>
KeyONoiseDelay 50 25 pp 1 00~7F <for E.PIANO sound>
Key Click Level 59 0E pp 1 00, 01~0A (O, 1~10) <for ORGAN sound>
Wheel Noise Level 59 0F pp 1 00~7F <for ORGAN sound>
9.Ch/Prog. MIDI Transmit Channel 58 02 pp 1 00~0F (1~16Ch)
Program Change Number 58 0B pp 1 00~7F (1~128)
Bank Number MSB 58 0E pp 1 00~7F (0~127)
Bank Number LSB 58 0F pp 1 00~7F (0~127)
10.SETUP Send Program On/O 58 0A pp 2 Send mode=00 (Program) /00, 01 (O, On)
Send Bank On/O 58 0A pp 2 Send mode=01 (Bank) /00, 01 (O, On)
Send Volume On/O 58 0A pp 2 Send mode=02 (Volume) /00, 01 (O, On)
Send Knobs On/O 58 0A pp 2 Send mode=03 (Knobs) /00, 01 (O, On)
11.Tr ansm it Edit System Exclusive 58 09 7F 2 Trans. mode=04 (SysEX) /00, 01 (O, On)
Recorder 58 09 7F 2 Trans. mode=02 (Recorder) /00, 01 (O, On)
Fader Assign 54 01 7F 3
Fader#=0~3/Func.ID MSB/Func.ID LSB
*<EXT>00/00~00/78
12.MMC Transmit MMC 58 09 7F 2 Trans. mode=03 (MMC) /00, 01 (O, On)
MMC Device ID 58 0C 7F 2 ParaID=00 (DeviceID) /Value=00~7F
MMC [RESET] 58 0C 7F 2
ParaID=01 (RESET) /Value=00 (NoAssign), 01~0D (MMC
commands), 0E~10 (Realtime [FA,FB,FC])
MMC [PLAY ] 58 0C 7F 2
ParaID=02 (PLAY) /Value=00 (NoAssign), 01~0D (MMC
commands), 0E~10 (Realtime [FA,FB,FC])
MMC [REC] 58 0C 7F 2
ParaID=03 (REC) /Value=00 (NoAssign), 01~0D (MMC
commands), 0E~10 (Realtime [FA,FB,FC])
MMC [A<->B] 58 0C 7F 2
ParaID=04 (A<->B) /Value=00 (NoAssign), 01~0D (MMC
commands), 0E~10 (Realtime [FA,FB,FC])
MMC [REW] 58 0C 7F 2
ParaID=05 (REW) /Value=00 (NoAssign), 01~0D (MMC
commands), 0E~10 (Realtime [FA,FB,FC])
MMC [FF] 58 0C 7F 2
ParaID=06 (FF) /Value=00 (NoAssign), 01~0D (MMC
commands), 0E~10 (Realtime [FA,FB,FC])
* Pedal/Wheel/Fader assign:
<INT> Mod., Pan., Exp., Damper, Soste., Soft, Reso., Cuto, EFX1 Para1~10, EFX2 Para1~10
<EXT> CC#0~119, AfterTouch
** SW Button assign:
Oct.Layer, Rotary, Solo, Portament, Bend. Lock, Mod. Lock, Center Lock, Left Lock, EXP Lock, TW Control
3.4 Setup Parameters: EDIT Menu (cont.)