Kawai MP7SE - Page 44

44
EDIT Menu
EDIT Menu parameters (INT mode)
3 Sound (MAIN zone, TONEWHEEL mode)
1. External Control
off, midi cc# midi cH
This parameter determines whether or not the toneweel organ
drawbars can be adjusted by external MIDI devices. When set
to CC# or MIDI Ch, an additional parameter page will appear,
allowing CC# or MIDI channels to be assigned to each drawbar.
* This is a SYSTEM parameter and therefore memorised automatically. For
more information about SYSTEM parameters, please refer to page 106.
2. MIDI CC#
value: cc#0 ~ cc#119
This parameter sets the CC# used for adjusting tonewheel organ
drawbars when MIDI Control is set to MIDI Ch.
* This is a SYSTEM parameter and therefore memorised automatically. For
more information about SYSTEM parameters, please refer to page 106.

MIDI CC# Drawbar Assign value: cc#0 ~ cc#119
Knob C:
select
drawbar
Knob D:
assign
MIDI CC#
Turn control knob C to select the drawbar, and control knob D
to assign the MIDI CC#.

MIDI Ch Drawbar Assign value: 01cH ~ 16cH
Knob C:
select
drawbar
Knob D:
assign
MIDI Ch
Turn control knob C to select the drawbar, and control knob D to
assign the MIDI channel.