KEB COMBIVERT F5 User Manual

112
Parameter Description - Driving Profi le
Intermediate speed one, uses pro le 0 acceleration and decelera-
tion. Can be assigned as emergency operation speed.
Unit: feet per minute
Value range: 0...LF.20
Default setting: 0 ft/min
Adjusted value: dependent on the distance between the
 oors
Set Speed S
INT1
,
Intermediate Speed 1
Intermediate speed two, uses pro le 0 acceleration and decelera-
tion. Can be assigned as emergency operation speed.
Unit: feet per minute
Value range: 0...LF.20
Default setting: 0 ft/min
Adjusted value: dependent on the distance between the
 oors
Set Speed S
INT2
,
Intermediate Speed 2
Intermediate speed three, uses pro le 0 acceleration and decel-
eration. Can be assigned as emergency operation speed.
Unit: feet per minute
Value range: 0...LF.20
Default setting: 0 ft/min
Adjusted value: dependent on the distance between the
 oors
Set Speed S
INT3
,
Intermediate Speed 3

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)