KEB COMBIVERT F5 User Manual

116
t
Speed
LF.41
LF.44
1.LF.50
LF.56
High Leveling Speed
1.LF.52
1.LF.53
1.LF.51
1.LF.54
1.LF.55
t
Speed
LF.42
0.LF.51
0.LF. 50
High Speed Stop
Without Leveling Speed
0.LF. 52
LF. 56
LF. 56
LF. 56
Important! If the high speed, intermediate speeds or high leveling speeds
are turned off and leveling speed is not activated immediately afterward, the
drive will use the stop jerk in LF.56 for the slowdown pro le. This will result
in a very slow deceleration of the car and may cause the car to overshoot the
desired stopping point. Leveling speed must always be activated to ensure
the normal deceleration pro le.

t
Speed
LF.43
1.LF.50
Inspection Speed
1.LF.52
1.LF.53
1.LF.51
1.LF.54
1.LF.55
Parameter Description - Driving Profi le

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)