Keithley 263 User Manual

GENERAL INFORMATION
Model 6167 Guarded Input Adapter is used to reduce ef-
fective cable capacity by driving the inner shield of the
triaxial cable at guard potential. Use to make guarded con-
nections from the Model 263 to Keithley Models 602, 614
and 6161 Electrometers. Triax female to triax male.
Models 6171 and 6172 3-Lug to 2-Lug Adapters-The
Model 6171 is a 3-lug male to 2-lug female triadal adapter,
while the Model 6172 is a 2-lug male to 3-lug female triaxial
adapter.
Model 6191 Guarded Input Adapter is similar to the
Model 6167 except it is used to make guarded connections
from the Model 263 to the Model 619 Electrometer. Triax
female to triax male.
Models 7007-l and 7007-2 are shielded IEEE-488 interface
cables with shielded connectors on each end. The 7007-l
is lm (3.3 ft.) in length and the 7007-2 is 2m (6 ft.) in
length.
Model 7010 Shielded IEEE to IEEE Adapter provides ad-
ditional clearance between the IEEE-488 cable and rear
panel, allowing easier access to switches, cables, and other
connectors.
Model 7023 Female Triaxial Connector is a chassis mount
connector that mates with the Models 6011 and 7024 triax-
ial cables.
Models 7024-3 and 7024-10 are triaxial cables terminated
with 2-lug male triaxial connectors on each end. The 7024
is 0.9m (3 ft.) in length and the 7024-10 is 3.0m (10 ft.) in
length.
l-311-4

Keithley 263 Specifications

General

Brand	Keithley
Model	263
Category	Test Equipment
Language	English