Name: Keithley 3706A
Brand: Keithley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Series 3700A System Switch/Multimeter Reference Manual Section 4: Basic DMM operation

3700AS-901-01 Rev. D/June 2018 4-45

Settings available for continuity testing

• autodelay (dmm.AUTODELAY_ONCE, dmm.ON or dmm.OFF)

• display digits (3, 4, 5, 6, or 7)

• line synchronization (dmm.ON or dmm.OFF)

• math enable (dmm.ON or dmm.OFF)

• math format (dmm.MATH_NONE, dmm.MATH_MXB, dmm.MATH_PERCENT, or

dmm.MATH_RECIPROCAL)

• math mxb b factor (–4294967295 to +4294967295)

• math mxb m factor (–4294967295 to +4294967295)

• math mxb units

• math percent (–4294967295 to +4294967295)

• nplc (0.0005 to 15 for 60 Hz; 0.0005 to 12 for 50 Hz)

• threshold (1 to 1000 Ω)

Autodelay and autorange settings

The following table provides times for autodelay and autorange time for the continuity functions.

Function

Detector bandwidth

Range and delays

Continuity

Range

1 kΩ

Autodelay

3 ms

Autorange

2.5 ms

Continuity testing connections

When using the rear analog backplane connector, connect the test leads to the INPUT HI and LO

terminals as shown below.

Figure 64: Continuity connections

Other manuals for Keithley 3706A

Questions and Answers:

Need help?

Do you have a question about the Keithley 3706A and is the answer not in the manual?

General