Keithley 3706A Reference Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-327
scan.stepcount
This attribute returns the number of steps in the present scan.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
scanStepCount = scan.stepcount
scanStepCount
The present step count value
Details
This is set by the number of steps in the active scan list. The value of this attribute is initially
determined when the scan is created. Adding steps with the scan.create(),
scan.addimagestep(), and scan.add() functions updates this attribute's value.
Example
print(scan.stepcount)
Responds with the present step count.
Output assuming there are five steps in the
scan list:
5.00000e+00
Also see
scan.add() (on page 11-309)
scan.addimagestep() (on page 11-311)
scan.create() (on page 11-315)
Scanning and triggering (on page 5-23)
scan.trigger.arm.clear()
This function clears the arm event detector.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
scan.trigger.arm.clear()
Details
This function sets the trigger model's arm event detector to the undetected state.
Example
scan.trigger.arm.clear()
Clears the arm event detector.
Also see
scan.trigger.arm.set() (on page 11-328)
scan.trigger.arm.stimulus (on page 11-328)
Trigger model (on page 5-24)
Scanning and triggering (on page 5-23)

Keithley 3706A Specifications

General

Model	3706A
Category	System Switch/Multimeter
Voltage Range	100 nV to 300 V
Basic DC Voltage Accuracy	0.0035%
Basic Resistance Accuracy	0.01%
Maximum Channels	576
Maximum Voltage	300 V
Connectivity	LAN, USB, GPIB
Interface	LAN, USB, GPIB
Switching Matrix	Yes
Channels	576 (6-slot mainframe)
Maximum Current	3 A