1-4 Getting Started Model 6487 Reference Manual
Handling precautions
• Always grasp the Model 6487 by the covers.
• After removing the Model 6487 from its anti-static bag, inspect it for any obvious
signs of physical damage. Report any such damage to the shipping agent
immediately.
• When the Model 6487 is not installed and connected, keep the unit in its anti-static
bag and store it in the original packing carton.
Package content
The following items are included with every Model 6487 order:
• Model 6487 Picoammeter with line cord
• Protective triax Shield/Cap (CAP-31)
• 7078-TRX-3 Triax cable
• Model 8607 1kV Source banana cable set
• CS-459 4-Pin Female interlock connector
• Accessories as ordered
• Certificate of calibration
• Model 6487 User’s Manual (P/N 6487-900-00)
• Product information CD-ROM that contains PDFs of the User’s and Reference
Manuals
Reference manual
If a printed copy of the Model 6487 Reference Manual is required, order the manual pack-
age. The Keithley part number for the reference manual package is 6487-901-00. The
manual package includes an instruction manual and any pertinent addenda.
Additional references
While reading this document, you may find it helpful to consult the following documenta-
tion for reference:
Model 6487 User’s Manual — Supplied in printed form and as a PDF on the Product
Information CD-ROM included with your shipment, this manual contains basic operating
information for the user.
Low Level Measurements handbook — Keithley’s guide for effective low current, low
voltage, and high impedance measurements. Refer to www.keithley.com for more details.
To Next Page
Loading...
