3
Measurements and
Sourcing Voltage
• Measurement overview — Explains the basic measurement and voltage source
capabilities of Model 6487.
• Performance considerations — Covers warm-up period, voltage offset correction,
autozero, zero check, and zero correct.
• Current measurements — Provides a basic procedure to measure current.
• Ohms measurements — Covers methods to set up and use the ohms measurement
function.
• Voltage source operation — Discusses configuring and using the voltage source.
• Alternating voltage ohms mode — Discusses the alternating voltage mode that
can be used to improve accuracy and repeatability of very high resistance
measurements.
To Next Page
Loading...
