Kemper 345plus - Install New Rotating Blades

Service
Continued on next page KM00321,000035F -19-09DEC14-1/2
Install New Rotating Blades
KM225015 —UN—09DEC14
A—Yellow Blade
B—Black Blade
C—Cleaner (Counter-Clockwise) D—Strap
E—Cleaner (Clockwise)
F— Direction of Cut
CAUTION: Before making any adjustments or
performing any service operations, always:
- Shut off the engine
- Take out the ignition key
- Wait until all moving parts have stopped.
IMPORTANT: The rotating blades must be installed
with their tips pointing in the direction of cut (F).
1. There are different blades.
In all, 4 blades are installed on each rotating blade.
- 2 yellow blades (A) and
- 2 black blades (B)
2. The blades are installed in the following order: 1
yellow, 1 black, 1 yellow and 1 black blade.
IMPORTANT: Install blades with the coated
side uppermost.
3. Remember to install cleaner (C) or (E) as shown
in the installation scheme. Cleaner (C) is for
counter-clockwise rotation and cleaner (E) is for
clockwise rotation.
NOTE: Install cleaners (C) and (E) with their cutting
edges pointing in the direction of cut.
55-6
031519
PN=113