Kemper 345plus - Connecting the Drive (Forage Harvester Types 493, 494, 497, and 498)

Attaching to a Claas forage harvester
KM00321,0000880 -19-18DEC18-1/9
Continued on next page KM00321,0000880 -19-18DEC18-2/9
Connecting the Drive (Forage Harvester
Types 493, 494, 497, and 498)
1. Completely remove claw clutch (A) from rotary
harvesting unit drive.
To do this, disassemble items 1 to 11.
A—Claw clutch
KM1000867 —UN—26MAY09KM1000868 —UN—26MAY09
2. Screw threaded rod (B) into the universal-jointed shaft,
adjust to 167 mm (6.57 in.) (X) and counterlock with
hex nut (A).
A—Hex nut
B—Threaded rod
X—167 mm (6.57 in.)
KM1000872 —UN—26MAY09
20-16
031519
PN=43