Kemper 345plus - Accident Prevention (Rotary Harvesting Units Without Lateral Protective Brackets)

Transport
KM00321,000035B -19-16DEC14-1/4
Continued on next page KM00321,000035B -19-16DEC14-2/4
Accident Prevention (Rotary Harvesting
Units without Lateral Protective Brackets)
When driving on public roads, the entire area around the
dividers must be secured by accident prevention device
(C) and curtains (A).
Clearance and indicator lights:
Before driving on public roads, connect the wiring harness
of clearance and indicator lights (B) to the socket provided
on the forage harvester.
Ground clearance:
When driving on public roads, the rotary harvesting unit
must be raised so that the front of the accident prevention
device (C) is approx. 300 mm (1 ft.) above the ground.
KM1001119 —UN—19FEB10
A—Curtains
B—Clearance and Indicator
Lights
C—Accident Prevention Device
Installation:
1. After the rotors have come to a complete stop, fold
up the side sections.
2. Install blocks (A) on the outer dividers.
A—Block
KM1002330 —UN—29JUN12
30-4
031519
PN=72