Kemper 345plus - Accident Prevention (Rotary Harvesting Units with Lateral Protective Brackets)

Transport
KM00321,0000194 -19-29JUN12-1/1
Accident Prevention (Rotary Harvesting Units with Lateral Protective Brackets)
KM1001190 —UN—29APR10
A—Accident Prevention Device
B—Curtains
C—Clearance and Indicator
Lights
D—Protective Bracket
When driving on public roads, the entire area around the
dividers must be secured by accident prevention device
(A) and curtains (B).
Installation:
1. After the rotors have come to a complete stop, fold
up the side sections.
NOTE: When folding up the rotary harvesting unit,
lateral protective brackets (D) will swing into
transport position automatically.
2. Fold out accident prevention device (A) and attach to
outer dividers.
3. Install curtains (B) on side sections and secure using
rubber rings.
4. The skid shoes, blades and other edges are covered
with curtains (B).
Clearance and indicator lights:
Before driving on public roads, connect the wiring harness
of clearance and indicator lights (C) to the socket provided
on the forage harvester.
Ground clearance:
When driving on public roads, the rotary harvesting unit
must be raised so that the front of the accident prevention
device (A) is approx. 300 mm (1 ft.) above the ground.
30-3
031519
PN=71