Kemper 345plus - Attaching to KRONE Forage Harvesters (Models BIG X 500, 600, 650, 700, 770, 800, 850, 1000 and 1100)

Attaching to a KRONE Forage Harvester
KM00321,000053F -19-14JUN16-1/7
Continued on next page KM00321,000053F -19-14JUN16-2/7
Attaching to KRONE Forage Harvesters
(Models BIG X 500, 600, 650, 700, 770, 800,
850, 1000 and 1100)
1. Unlatch lever (A).
A—Lever
KM1002311 —UN—14JUN12
2. Drive the forage harvester slowly to the rotary
harvesting unit until pins (A) on the right and left sides
of the rotary harvesting unit are above the upper
receiver jaws (B) on the forage harvester.
Lift the feed roll housing up and attach the rotary
harvesting unit.
A—Pin B—Receiver Jaws
KM1002312 —UN—21JUN12KM1002313 —UN—21JUN12
22-8
031519
PN=59